Rohm KZS-H, Перевод оригинального руководства по эксплуатации

Страница: 35 / 44

Maintenance | 7
KZS-H_KZS-HG 35 / 44
7 Maintenance
7.1 Personal Protective Equipment and Personnel Qualification
When working on and with the centric clamp KZS-H/KZS-HG, personal pro-
tective equipment must be worn. The owner is responsible for providing per-
sonal protective equipment.
▪ Personal protective equipment must be in perfect condition when carrying
out work. Defective safety equipment is to be replaced immediately.
▪ Observe information on personal protective equipment posted in the work-
ing area.
▪ During rotational operation of the centric clamp KZS-H/KZS-HG, no pro-
tective gloves are to be worn! Hand protection is only to be worn during
transport, assembly and maintenance and as long as the centric clamp
KZS-H/KZS-HG is at a standstill.
Wear protective gloves
Wear safety goggles
Wear safety shoes
Work on and with the centric clamp may only be carried out by qualified oper-
ating and specialist personnel (see
Qualification of Operating and Special-
ist Personnel [ } 12] ).
7.2 Maintenance Interval
The regular maintenance work is described in the following:
Activity Interval
Check tightness of screw connec-
tions.
See
Checking the Tightness of
Screw Connections [
}
36] .
Weekly.
Partial cleaning (preliminary cleaning
and oiling).
See
Partial Cleaning [ } 37] .
After every use.
Lubricate the centric clamp.
See
Lubricating the Centric Clamp
[
}
37] .
Depending on conditions of use and
use of coolant after approx. 8 hrs.
or at the latest after 20 hrs. or 10,000
clamping cycles.