Rohm DURO-A, Перевод оригинального руководства по эксплуатации

Страница: 37 / 52

Operation | 6
Power Chuck DURO-A 37 / 52
6.1 Personal Protective Equipment and Personnel Qualification
When working on and with the power chuck DURO-A, personal protective
equipment must be worn. The owner is responsible for providing personal
protective equipment.
▪ Personal protective equipment must be in perfect condition when carry-
ing out work. Defective safety equipment is to be replaced immediately.
▪ Observe information on personal protective equipment posted in the
working area.
▪ During rotational operation of the power chuck DURO-A, no protective
gloves are to be worn! Hand protection is only to be worn during trans-
port, assembly and maintenance and as long as the power chuck
DURO-A is at a standstill.
Wear protective gloves
Wear safety goggles
Wear safety shoes
Work on and with the power chuck may only be carried out by qualified oper-
ating and specialist personnel (see
Qualification of Operating and Spe-
cialist Personnel [
}
12] ).
6.2 Basic Principles
The procedure for determining the clamping force and speed is given in the
document "
RÖHM Standard RN 1391 - General Information and
Guidelines for the Use of Power-Operated Clamping Devices ").
This document can either be requested from RÖHM GmbH or viewed/down-
loaded at www.roehm.biz/service/betriebsanleitungen → General free of
charge.
The actual clamping force must be checked regularly. See Checking the
Device for Correct Operation [ } 44] .