Rohm DURO-A RC, Перевод оригинального руководства по эксплуатации

Страница: 40 / 48

7 | Maintenance
40 / 48 DURO-A RC
7.2 Maintenance Interval
The regular maintenance work is described in the following:
Activity Interval
Lubricating Conical Lubricating
Nipples [
}
41] .
Approx. every 20 hrs.
depending on conditions of use and
use of coolant after 8 hrs.
or at the latest after 10,000 clamping
cycles.
Lubricating Jaw Guides [
}
42] . With each jaw replacement or at the
latest after 2,500 clamping cycles.
Checking the Device for Correct
Operation [
} 42] .
After 30,000 clamping cycles or after
3 months depending on the conditions
of use.
Visually inspect wear parts. Weekly
Checking the Tightness of Screw
Connections [
} 43] .
Weekly
Visually inspect jaw screws. Weekly
Replace jaw screws. Annually
Inspection of the Power Chuck
[
}
44] .
Annually
7.3 Maintenance Work
CAUTION
Skin irritations due to contact with lubricants.
Lubricants may cause irritations in the event of contact with the skin.
Ø
When handling the power chuck , wear safety goggles, long
work clothes and gloves.
Ø Avoid skin contact with lubricants.