Rohm BD7411G-EVK-001, Руководство пользователя

Страница: 1 / 4

1/2
© 2018 ROHM Co., Ltd.
No. 60UG061E Rev.001
Apr.2018
User’s Guide
Hall IC
BD7411G-EVK-001 Manual
BD7411G-EVK-001 is an evaluation board for BD7411G, which is a ROHM Hall IC. This User’s Guide is about how to use BD7411G-EVK-001
together with SensorShield*
1
. *1 SensorShield is sold as Shield-EVK-001.
Preparation
 Arduino Uno 1pc
 Personal Computer installed Arduino IDE 1pc
 Requirement : Arduino 1.6.7 or higher
 Please use Arduino IDE which can be
downloaded from the link below:
http://www.arduino.cc/
 USB cable for connecting Arduino and PC 1pc
 SensorShield 1pc
 BD7411G-EVK-001 1pc
 Magnet 1pc
Setting
1.
Connect the Arduino and the SensorShield (Figure 1)
Figure 1. Connection between the Arduino and the
SensorShield
2.
Connect BD7411G-EVK-001 to the socket of GPIO area
on the SensorShield (Figure 2)
3.
Set Voltage of the SensorShield to 5.0V (Figure 2)
Figure 2. Connection between BD7411G-EVK-001 and
the SensorShield
4.
Connect the Arduino to the PC using a USB cable
5.
Download BD7411G.zip from the link below:
http://www.rohm.com/web/global/sensor-shield-support
6.
Launch Arduino IDE
7.
Select [Sketch]->[Include Library]->[Add.ZIP library...],
install BD7411G.zip
8.
Select [File]->[Examples]->[BD7411G]->[example]->
[BD7411G]
USB connecter
SensorShield