Rohde ST 630, Руководство по эксплуатации

Страница: 63 / 344

61 / 341 - EN -
Display in firing mode:
Indicator on
the left
Main display
Heating zone
display on the right
Description
100 °C
During the firing, the “Heating” indicator to the left of
the main display shows that the kiln is heating up.
Segment display:
Display screen segment Description
° C
When the controller is switched on, the segment display shows the possible
temperature units during operation (°C/°F).
The temperature units can be configured as parameters (see section 12.).
° F
6.2. Keylock
Unlock keys:
Step Action Display screen
1
If any key is pressed and “LOCKED” appears in the display, the keys are
locked.
LOCKED
2
To unlock, press the
<
key and hold it down for 5 seconds until
“UNLOCKED” appears in the main display.
UNLOCKED
Lock keys:
Step Action Display screen
1
To lock, press the
<
key and hold it down for 5 seconds until “LOCKED”
appears in the main display.
LOCKED
2
If any key is pressed and “LOCKED” appears in the display, the keys are
locked.
LOCKED
6.3. Temperature display
6.3.1. Temperature display for single zone kilns
Main display
Heating zone display
on the right
Description
20 °C
A single-zone kiln will always show the temperature of heating
zone 1 only.
⇒
In that case, the “heating zone” display to the right of the
main display only shows “Zone 1 (z1)”.