Command Reference
R&S
®
ZNB/ZNBT
947
User Manual 1173.9163.02 ─ 38
Setting parameters:
<Channel>
Channel number
<SweepSegFile>
String parameter to specify the name and directory of the cre-
ated sweep segment file. The default extension (manual control)
for sweep segment files is
*.SegList
, although other exten-
sions are allowed.
If no path is specified the analyzer searches the current direc-
tory, to be queried with
Example:
See
Usage:
Setting only
Manual operation:
See
MMEMory:STORe:STATe
<Compatibility>, <RecallSetFile>
Stores the configuration data of the current recall set to a specified recall set file.
MMEMory:STORe:STATe
renames the current recall set, appending a
.znx
extension.
See example for
MMEMory:LOAD:STATe
.
Setting parameters:
<Compatibility>
1 (this value is used for compatibility with the SCPI standard but
ignored).
<RecallSetFile>
String parameter to specify the name and directory of the cre-
ated recall set file. The default extension (manual control) for
recall set files is
*.znx
, although other extensions are allowed.
If no path is specified the analyzer uses the current directory, to
be queried with
.
Example:
See
Usage:
Setting only
Manual operation:
See
MMEMory:STORe:TRACe
<TraceName>, <TraceFile>[, <FormatInd>, <Format>,
<DecSeparator>, <FieldSeparator>]
Stores the trace data of a specified data trace to a trace file. Traces are created using
the
CALCulate<Ch>:PARameter:SDEFine
command.
Tip:
*.s<n>p
Touchstone files (<n> = 1, 2, 3, ...) are intended for a complete set of
<n>-port S-parameters. Data export fails if the active channel does not contain the full
set of <n>
2
traces or if the involved ports are not numbered consecutively, starting with
port 1. If the necessary traces are available,
'<trc_name>'
can be the name of any
of the traces. To create Touchstone files while less than <n>
2
single-ended traces are
available, use
.
SCPI Command Reference
