Command Reference
R&S
®
ZNB/ZNBT
892
User Manual 1173.9163.02 ─ 38
Parameters:
<UppEdge>
Lower or upper edge of the zoom window. Range and unit
depend on the measured quantity, see
Default unit: NN
<TraceName>
Optional string parameter for the trace name, e.g. 'Trc4'. If this
optional parameter is present, both numeric suffixes are ignored
(trace names must be unique across different channels and win-
dows).
Example:
See
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:ZOOM[:
Manual operation:
See
DISPlay:ANNotation:CHANnel[:STATe]
<Boolean>
DISPlay:ANNotation:TRACe[:STATe]
<Boolean>
Shows or hides the channel/trace list(s) in all diagrams of the current recall set.
Parameters:
<Boolean>
ON | OFF - show or hide information element(s).
*RST:
ON
Example:
*RST; :DISP:ANN:TRAC OFF; CHAN ON; FREQ OFF
Create diagram area no. 1 (with default trace) and hide the trace
list. Keep the channel list but hide the swept frequency range.
Manual operation:
See
DISPlay:ANNotation:FREQuency[:STATe]
<Boolean>
Unmasks or masks all stimulus values in the VNA GUI for the active recall set.
Parameters:
<Boolean>
ON | OFF - unmask or mask stimulus values
*RST:
ON - all stimulus values unmasked
Example:
*RST; :DISP:ANN:FREQ OFF
Create diagram area no. 1 (with default trace) and mask all stim-
ulus values.
Manual operation:
See
DISPlay:CMAP:LIMit:FCOLorize[:STATe]
<Boolean>
Assigns a different trace color to failed trace segments ("Colorize Trace when Failed").
Parameters:
<Boolean>
ON | OFF - colorize trace or keep original trace color.
*RST:
n/a (a *RST does not affect the setting). In the fac-
tory configuration, OFF is preset.
SCPI Command Reference
