Command Reference
R&S
®
ZNB/ZNBT
756
User Manual 1173.9163.02 ─ 38
<Mk>
Marker number in the range 1 to 10. If unspecified the numeric
suffix is set to 1.
Parameters:
<Boolean>
ON | OFF
–
creates or removes the marker.
*RST:
OFF
Example:
Suppose that the active recall set contains an active trace no. 1.
CALC:MARK ON; MARK2 ON
Create markers 1 and 2 and assign them to trace no. 1. The
default position of both markers is the center of the sweep
range.
Manual operation:
See
CALCulate<Chn>:MARKer<Mk>:TARGet
<TargetSearchVal>
Defines the target value for the target search of marker no.
<Mk>
, which can be activa-
CALCulate<Chn>:MARKer<Mk>:FUNCtion:EXECute
TARGet
.
Suffix:
<Chn>
.
Channel number used to identify the active trace
<Mk>
Marker number in the range 1 to 10.
Parameters:
<TargetSearchVal>
Target search value of marker no.
<Mk>
.
The value range and reset value depend on the selected target
format (see
CALCulate<Chn>:MARKer<Mk>:SEARch:
Example:
CALC:MARK ON
Create marker no. 1 and display it in the center of the sweep
range.
:CALC:MARK:TARG -10; FUNC:EXEC TARG
Define a target search value of -10 dB and start the target
search.
CALC:MARK:X?
Query the stimulus value corresponding to the target search
result.
Manual operation:
See
CALCulate<Chn>:MARKer<Mk>:TYPE
<Mode>
Sets the marker mode for the related marker. The marker must be created before
using
CALCulate<Chn>:MARKer<Mk>[:STATe]
ON
.
Suffix:
<Chn>
.
Channel number used to identify the active trace
<Mk>
Marker number in the range 1 to 10.
SCPI Command Reference