GUI Reference
R&S
®
ZNB/ZNBT
557
User Manual 1173.9163.02 ─ 38
5.15.4 Trace Data Tab
See
Chapter 5.12.8, "Trace Data Tab"
5.15.5 More Tab
The "More" buttons load simulation data or close the VNA application.
Load Simulation Data...
Imports previously stored trace data into the active diagram. The analyzer opens a dia-
log box to select the file from all trace files (
*.s?p, *.csv, *.dat
) stored on the
file system; see
on page 100. The opened trace replaces the active
trace.
Exit
Persists the current state of all loaded recall sets and ends the analyzer session.
These states are automatically recalled when the analyzer application is re-started.
Tip:
This button is equivalent to the Windows
®
"Close window" command and to the
close icon in the title bar of the main firmware application window.
5.16 Print Softtool
The "Print" softtool consists of a single tab.
Access:
SYSTEM – PRINT hardkey
5.16.1 Print Tab
The buttons on the "Print" tab allow to send the active recall set (i.e. the contents of the
active diagrams) to an external printer, to a file or to the clipboard.
Print Softtool
