Rohde & Schwarz ZNB20, Руководство пользователя

Страница: 530 / 1332

GUI Reference
R&S
®
ZNB/ZNBT
515 User Manual 1173.9163.02 ─ 38
complex diagrams to a user-defined "Display Circle" and to add a user-defined hori-
zontal lines to cartesian diagrams.
Access: TRACE – LINES hardkey
Background information
Refer to Chapter 4.4.1, "Limit Check" , on page 129.
5.13.1 Limit Test Tab
Defines limit lines for the measurement results (upper and lower limits), visualizes
them in the diagrams and activates/deactivates the limit check.
Limit lines are available for all cartesian diagram types; "dB Mag" limits can also be
checked in complex diagrams (Smith, Polar).
Background information
Refer to Chapter 4.4.1, "Limit Check" , on page 129.
5.13.1.1 Controls on the Limit Test Tab
The "Define Limit Line..." button opens the "Define Limit Lines" dialog (see Chap-
ter 5.13.1.2, "Define Limit Lines Dialog" , on page 519).
Show Limit Line
Shows or hides the limit line associated with the active trace in a Cartesian diagram
area.
Lines Softtool