Rohde & Schwarz VENICE S Скачать руководство пользователя

Страница: 110 / 126

Transport



Safety Notes

110

VENICE S | User Manual | 2906.1345.02 - 02

Rohde & Schwarz GmbH & Co. KG

Safety Notes

VENICE S is a very sensitive device. Handle it with great care.
Especially the disks of the system must be handled with great
care.

Fragile. Avoid shocks or vibrations. For longer
distances use a lifting device.

Keep dry.

Risk of injury while handling compo-
nent with heavy weight

Improper handling of the

VENICE S

can

cause substantial damage to personnel
and equipment by falling or overturning.

■

VENICE S

must be lifted and carried by

two people on both sides.

■

It is preferable to use lifting devices and

means of transport.

■

Beware of the crushing hazard when

working with heavy loads.

Содержание VENICE S































































































































Результаты поиска

Содержание VENICE S

Отзывы:

Похожие инструкции для VENICE S

Бренды по названию

Популярные бренды

Rohde & Schwarz VENICE S, Руководство пользователя

Результаты поиска

Содержание VENICE S

Отзывы:

Похожие инструкции для VENICE S

Бренды по названию

Популярные бренды