Instrument Tour
R&S
®
TSMA6
25
Getting Started 4900.8040.02 ─ 06
7 = Restore button
8 = DC IN Connector
9 = USB-C (1x)
10 = USB 3.0 (4x)
11 = USB 2.0 (2x)
12 = LAN Port - Remote Control R&S
TSMA6
13 = HDMI Connector
14 = RF In Connector
15 = Docking Connector R&S
TSMA6-BP
WLAN/Bluetooth ON/OFF
Switches WLAN and Bluetooth on and off.
SCAN (LAN Connector (Gbit))
The LAN connector provides a high-speed 1 Gbit Ethernet interface with an RJ 45
connector. It is used to connect the R&S
TSMA6 to a separate R&S TSME6 as a
second scanner. It can be used for MIMO scenarios and for increasing bandwidth
and measurement rate.
AUX Connector
The AUX connector has two functions.
●
IN/OUT synchronization with up to 4 connected R&S TSME6 (requires sync
cable R&S TSME6-ZC2, R&S no. 4900.1800.02 or R&S TSME6-ZC4, R&S
no. 4900.1817.02)
●
Synchronization of R&S
TSMA6 with an external 10 MHz reference (requires
dedicated sync cable)
GPS Ant.
An SMA connector is provided for the supplied external active GPS antenna
(Antenna power: 3
V, max. 25
mA).
The integrated multi-GNSS (GPS / BeiDou / Galileo / GLONASS) receiver allows
to use three satellite systems in parallel. This offers an accuracy improvement of
30 % to 50 % by using a second constellation of satellites.
Following combinations are allowed:
●
GPS only
●
GPS / GLONASS / Galileo
●
GPS / BeiDou
Rear Panel View
