Remote Control Commands
R&S
®
TS7124AS
51
Instructions Handbook 1179.2948.02 ─ 01
NET:<IP>:<NETMASK>:<GATEWAY>
Sets the static network configuration, if you have disabled DHCP, see
.
To query the network settings, use the
Parameters:
<IP>
Specifies the IP address in "000.000.000.000" format.
The default IP port is "5000".
<NETMASK>
Specifies the netmask, typically "255.255.255.000".
<GATEWAY>
Specifies the gateway in "000.000.000.000" format.
Example:
NET:192.168.78.4:255.255.255.000:192.168.78.1
Usage:
Setting only
NET:HN:<hostname>
Sets an optional hostname that you can use instead of the IP address.
Using a hostname is functional only in DHCP mode, see
Syntax: You can use digits 0 to 9 and letters a to z or A to Z, where the difference
between uppercase and lowercase letters is ignored. You can use hyphens ("-"), but
not at the beginning or end of the hostname. No special characters or blank spaces are
permitted, even though the RC module does not check your input for character validity.
If setting the hostname was successful, the RC module returns "
OK
".
If you use the command without entering any characters for the hostname, the RC
module returns "
ERR
".
Parameters:
<hostname>
We recommend using a combination of the string "TS7124AS-"
and the six-digit serial number of the chamber.
For example, "
TS7124AS-100123
".
Usage:
Setting only
8.3
Door Operation Commands
Familiarize yourself with residual risks and potentially dangerous situations.
See
"Risk of hurting another person"
.................................................................................. 53
Door Operation Commands
