Rohde & Schwarz SR8000 Series, Системное руководство

Страница: 74 / 199

Chapter 4 Putting into Operation
5300.9677.72 - 4.13 - EN-4
2. Select the required settings.
The table below explains the adjustable parameters:
2.3.3 Setting the Nominal Deviation, Configuring the Limiter
1. Select Transmitter > Exciter > Deviation/Limiter .
The Deviation/Limiter window opens.
Setting item Description
Pilot tone Setting of the deviation produced by the pilot tone for stereo
Value range: 2 kHz through 10 kHz (default setting 7 kHz)
Active (Pilot tone) Switches the pilot tone on and off (active only in stereo mode; the pilot
tone is always off in mono mode)
Preemphasis Selection of the signal preemphasis: 50
µ
s (default setting) or 75
µ
s
Active (Preemphasis) For switching preemphasis on or off (with MPX mode still inactive)
Display Description
Actual Modulation Displays the current modulation format setting
(
the modulation format is defined in the Input > Automatic Input menu
window )
Tip : The context menu ( Menu key) contains the entry Mod. Select for
directly calling the Input > Automatic Input menu window. The Back
key takes you back to the original menu.