Rohde & Schwarz SMM100A, Руководство пользователя

Страница: 880 / 1088

Remote control commands
R&S
®
SMM100A
880 User Manual 1179.1341.02 ─ 05
[:SOURce<hw>]:CORRection:ZERoing:STATe <State>
Activates the zeroing procedure before filling the user correction data acquired by a
sensor.
Parameters:
<State> 1 | ON | 0 | OFF
*RST:
1
Example: See Example "Fill user correction data with sensor"
on page 877.
Manual operation: See "Fill User Correction Data with Sensor" on page 402
[:SOURce<hw>]:CORRection:CSET:DATA[:SENSor<ch>][:POWer]:SONCe
Fills the selected user correction list with the level values measured by the power sen-
sor for the given frequencies.
Suffix:
SENSor<ch>
.
Defines the used power sensor, i.e. the sensor whose values are
used.
Example: See Example "Fill user correction data with sensor"
on page 877.
Usage: Event
[:SOURce<hw>]:CORRection[:STATe] <State>
Activates user correction with the currently selected table.
Parameters:
<State> 1 | ON | 0 | OFF
*RST:
0
Example: See Example "Create a table with user-defined correction values
for the RF level" on page 876 .
Manual operation: See "State" on page 397
[:SOURce]:CORRection:CSET:CATalog?
Queries a list of available user correction tables.
Return values:
<Catalog> string
List of list filenames, separated by commas
Example: See Example "Create a table with user-defined correction values
for the RF level" on page 876 .
Usage: Query only
SOURce subsystem