Rohde & Schwarz SMM100A, Руководство пользователя

Страница: 866 / 1088

Remote control commands
R&S
®
SMM100A
866 User Manual 1179.1341.02 ─ 05
Return values:
<Pep> float
Range:
-145 to 20
Increment: 0.01
*RST:
0
Example: see Example "Generating an additive noise signal" on page 860
Usage: Query only
Manual operation: See "C Noise PEP, Noise PEP (Total Band-
width), C Interferer PEP, Interferer PEP"
on page 273
[:SOURce<hw>]:AWGN:FREQuency:CENTer:OFFSet <CenterFreqOffs>
Defines the frequency offset of the noise signal relative to the carrier center frequency.
Parameters:
<CenterFreqOffs> float
Range:
-40E6 to 40E6
Increment: 0.01
*RST:
0
Example: See Example "Generating a pure noise signal" on page 859.
Manual operation: See "Center Frequency Offset" on page 268
[:SOURce<hw>]:AWGN:FREQuency:TARGet <Target>
Sets the desired frequency of the sine wave.
Parameters:
<Target> float
Range:
-40E6 to 40E6
Increment: 0.01
*RST:
0
Example: see Example "Generating a CW interferer signal" on page 859
Manual operation: See "Target CW Frequency Offset" on page 268
[:SOURce<hw>]:AWGN:FREQuency:RESult?
Queries the actual frequency of the sine wave.
Return values:
<Result> float
Range:
-40E6 to 40E6
Increment: 0.01
*RST:
0
Example: see Example "Generating a CW interferer signal" on page 859
SOURce subsystem