Rohde & Schwarz SMM100A, Руководство пользователя

Страница: 776 / 1088

Remote control commands
R&S
®
SMM100A
776 User Manual 1179.1341.02 ─ 05
[:SOURce<hw>]:BB:DM:STANdard:ULISt:LOAD <Filename>
[:SOURce<hw>]:BB:DM:SETTing:LOAD <Filename>
Loads the selected file from the default or the specified directory. Loaded are files with
extension
*.dm
respectively
*.dm_stu
.
Refer to Chapter 13.5.2, "Accessing files in the default or in a specified directory" ,
on page 662 for general information on file handling in the default and a specific direc-
tory.
Setting parameters:
<Filename> string
Example: See Example "Performing general tasks" on page 770
Usage: Setting only
Manual operation: See "Save/Recall" on page 117
[:SOURce<hw>]:BB:DM:STANdard:ULISt:DELete <Filename>
[:SOURce<hw>]:BB:DM:SETTing:DELete <Filename>
Deletes the selected file from the default or specified directory. Deleted are files with
the file extension
*.dm
respectively
*.dm_stu
.
Refer to Chapter 13.5.2, "Accessing files in the default or in a specified directory" ,
on page 662 for general information on file handling in the default and a specific direc-
tory.
Setting parameters:
<Filename> string
Example: See Example "Performing general tasks" on page 770
Usage: Setting only
Manual operation: See "Save/Recall" on page 117
Filter settings
[:SOURce<hw>]:BB:DM:FILTer:TYPE <Type>
The command selects the filter type.
When a standard is selected (
:BB:DM:STAN
), the filter type and filter parameter are
set to the default value.
Parameters:
<Type> RCOSine | COSine | GAUSs | LGAuss | CONE | COF705 |
COEQualizer | COFequalizer | C2K3x | APCO25 | SPHase |
RECTangle | USER | PGAuss | LPASs | DIRac | ENPShape |
EWPShape | LTEFilter | LPASSEVM | APCO25Hcpm |
APCO25Lsm | HRP
*RST:
GAUSs
SOURce subsystem