Rohde & Schwarz SMM100A, Руководство пользователя

Страница: 43 / 1088

Getting started
R&S
®
SMM100A
43 User Manual 1179.1341.02 ─ 05
1 2 3 4
8 7 6
5
Figure 3-7: Instrument board R&S SMM-B9
1 = Dig I/Q, page 45
2 = HS Dig I/Q, page 45
3 = Adv Data/Ctrl, page 46
4 = T/M/C, page 45
5 = Board designation (CODER)
6 =
I/Q, I/Q Bar, page 46
7 = Mod Ext 1/2, page 46
8 = Adv. Trg., Adv. Clk., page 46
3.2.2.1 Connectors
I/Q
Rear panel I/Q input connectors for use of the instrument in a 19" rack. See "I/Q"
on page 39.
How to: Chapter 3.1.4.2, "Mounting the R&S SMM100A in a rack" , on page 26
RF
Rear panel RF output connectors for use of the instrument in a 19" rack. See "RF"
on page 40.
How to:
●
Chapter 3.1.4.2, "Mounting the R&S SMM100A in a rack" , on page 26
●
Chapter 3.1.9, "Connecting to RF" , on page 30
Ref In/Ref Out
Input/output for external reference signal.
BNC connectors for reference signals from 1 MHz to 100 MHz.
SMA connectors for 1 GHz reference signals.
How to: Chapter 3.1.11, "Connecting to Ref In/Ref Out" , on page 32
User x
BNC multipurpose connectors for defining input signals and output signals.
Table 3-10 lists the signals assigned to the User x connectors in the default instrument
state.
Instrument tour