manualshive.com logo in svg

Rohde & Schwarz SMM100A, Руководство пользователя

Поделиться
Скачать
Rohde & Schwarz SMM100A Скачать руководство пользователя страница 248

Configuring the internal baseband source

R&S

®

SMM100A

248

User Manual 1179.1341.02 ─ 05

4.11.1

 

Required options

The equipment layout for processing of waveform files includes

●

Option baseband generator (R&S

 

SMM-B9)

●

Option Multi-Carrier CW (R&S

 

SMM-K261)

4.11.2

 

About the MCCW

The R&S

 

SMM100A can calculate and generate a multi-carrier continuous wave signal

build form up to 8192 unmodulated carriers. The carrier offset and the power level of
the carriers are user-definable. The provided settings allow individual configuration of
each carrier and the joint configuration of subset of carriers. Automatic start phase set-
ting is provided to minimize the crest factor.

The multi-carrier CW signals are not generated in realtime but rather computed in arbi-
trary waveform mode. Changes in the carrier settings are not considered until the
instrument is triggered to accept and apply them.

The common application fields of the multi-carrier CW signals are the receiver tests
with broadband test signals.

4.11.3

 

MCCW settings

Access:

► Select "Baseband > Multi-Carrier CW".

The dialog enables direct carrier configuration, access to the carrier table and the
graphical representation of the configured carriers.

Generating multi-carrier continuous wave signal

Содержание SMM100A

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды