manualshive.com logo in svg

Rohde & Schwarz SMF-B1, Руководство по эксплуатации

Поделиться
Скачать
Rohde & Schwarz SMF-B1 Скачать руководство пользователя страница 70

Preparing for Use

R&S

®

SMF100A

55

Operating Manual 1167.2319.02 ─ 12

2.8.2.5

SCPI Remote Trace

The remote trace functionality allows you to trace input and output strings at the
remote control interface of the R&S

 

SMF.

A recorded trace (message log) can be evaluated directly in the dialog. Use the high-
lighting and navigation functions provided in the lower toolbar to locate error messages
and messages containing arbitrary search strings. You can also export the message
log to a 

*.csv

 file and evaluate the file using a suitable program.

To trace and display messages:

1. In the navigation pane, select "Diagnostics" > "SCPI Remote Trace".

2. In the toolbar bar of the "SCPI Remote Trace" page, select "live mode" > "on" and

"logging" > "on".

"live mode > on" displays all commands and responses, and "logging > on" also
traces messages.

3. If you now control the R&S

 

SMF with SCPI commands, using an appropriate tool,

the SCPI remote trace records the information sent and received.

The function records all sent commands, received responses and messages, and
stores them in an internal database. If "live mode" is disabled, you can display the
recent traces upon request, using the "refresh" button. You can also store the log in
a file.

Note:

 The diagnostics functionality is extended in later releases, e.g. to download

or upload SCPI command files from / to the instrument.

 

LXI Configuration

Содержание SMF-B1














































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды