Manual Operation
R&S
®
SMF100A
92
Operating Manual 1167.2319.02 ─ 12
case of a connected network, all network drives that can be accessed are available.
The files are accessed in a "Save/Recall" dialog in the individual menus.
The files are differentiated according to their extensions; each type of file is assigned a
specific file content. The extension is usually of no consequence to the user since
access to the files occurs in the individual menus where only the relevant type of file is
available. See
Chapter 4.7.2.1, "Extensions for User Files"
on page 95 for an over-
view of the supported file extensions.
The user data can be roughly divided into the following data types:
●
Settings
Instrument settings can be saved and loaded. In case of saveing, the current set-
ting is saved to the specified file.
●
Lists
Lists, e.g. user correction lists, can be loaded. They can be generated either exter-
nally or internally. For internal generation, a new list must be created in the "File
Select" dialog which will then be edited in the list editor of the individual menu.
For more information, refer to:
●
Chapter 4.8, "Legend of Front-Panel Controls"
on page 95 for an overview of key
functions and a cross-reference between the front panel keys and the keyboard
shortcuts
●
to section "Instrument Functions" for a detailed description of key functions.
Accessing files with user data
1. To access an editable user data file, select the "Save/Recall" or "File Manger" func-
tion in the individual dialog.
2. To access a loadable data file, select the "Select/New" or "File Manager" function
in the individual dialog.
3. To access the "File Manager" function, press the SETUP (CTRL+E) key and select
"Save/Recall > File Manager".
A "File Select" window for loading, saving or creating a file or the "File Manager"
dialog for managing all files is displayed.
File Management