Rohde & Schwarz SMBV100A, Руководство по эксплуатации

Страница: 697 / 911

Remote Control Commands
R&S
®
SMBV100A
682 Operating Manual 1176.8016.02 ─ 17
[:SOURce<hw>]:BB:DM:FLISt:POINts?
Queries the user filter list length.
Return values:
<Points> integer
Range:
0 to INT_MAX
*RST: 0
Example: BB:DM:FILT:TYPE USER
selects the User filter type.
BB:DM:FLIS:POIN?
queries the list length.
Usage: Query only
[:SOURce<hw>]:BB:DM:FLISt:SELect <Filename>
Selects the user-defined filter (
*.vaf
).
The directory applicable to the following command is defined with the command
MMEM:CDIRectory
. To access the files in this directory, only the file name is required,
without the path and the file extension.
Parameters:
<Filename> string
Example: BB:DM:FILT:TYPE USER
selects the User filter type.
MMEM:CDIR '/var/user/Filter_List'
sets the default directory for the user-defined filters.
BB:DM:FLIS:SEL user_filter3
selects the user-defined filter.
Manual operation: See "Load User Filter" on page 361
[:SOURce<hw>]:BB:DM:MLISt:DELete <Filename>
Deletes the secified user mapping file. The default directory is set using command
MMEM:CDIRectory
. A path can also be specified, in which case the files in the speci-
fied directory are read. The file extension may be omitted. Only files with the file exten-
sion
*.vam
will be deleted.
Setting parameters:
<Filename> string
Example: BB:DM:FORM USER
selects the User modulation type.
MMEM:CDIR '/var/user/mapping_List'
sets the default directory for the user mapping lists.
BB:DM:MLIS:DEL user_mapping3
deletes the user mapping list.
Usage: Setting only
SOURce Subsystem