Rohde & Schwarz SMBV100A, Руководство по эксплуатации

Страница: 61 / 911

Preparing for Use
R&S
®
SMBV100A
46 Operating Manual 1176.8016.02 ─ 17
Each instrument is delivered with an assigned computer name, but this name can be
changed.
The default instrument name is a non-case-sensitive string that follows the syntax
rs<instrument><serial number>
.
The serial number can be found on the rear panel of the instrument. It is the third part
of the device ID printed on the bar code sticker:
Querying and changing a computer name
1. Press the "Setup" key and select "Network Settings".
The computer name is displayed under "Hostname".
2. Press the "Setup" key, select "Protection" and enable the "Protection Level 1".
The default password is 123456 .
The parameter "Hostname" in the "Network Settings" dialog is now enabled for
configuration.
3. Change the "Hostname".
2.7 Remote Access via an External Controller
The R&S SMBV can be remote accessed from a remote computer (external controller)
via a network link. This allows convenient operation of the instrument from the desktop
although the instrument is integrated in a rack somewhere else.
For an overview of the instrument's operating concept and the different ways to control
and operate the instrument, see
Chapter 3.1, "Brief Introduction to the Instrument's
Concept" , on page 63.
There are different ways to establish a remote access connection to the signal genera-
tor but all of them require an established LAN connection between the instrument and
the remote computer. The simplest way to remote access the instrument is to use a
Web browser, such as Windows Internet Explorer or Mozilla Firefox for instance. Alter-
natively a remote access via a special application can be used.
For example, the free-of-charge program Ultr@VNC for PCs with Linux/Unix or Win-
dows operating system is available for setting up the remote access connection. Using
this application requires additional installation.
See the following table for an overview of the different ways to establish a remote
access connection to the signal generator.
Remote Access via an External Controller