Rohde & Schwarz SMBV100A, Руководство по эксплуатации

Страница: 384 / 911

Instrument Function
R&S
®
SMBV100A
369 Operating Manual 1176.8016.02 ─ 17
The bit position is specified in the "Ramp Position" column, the high or low signal sta-
tus in the "Ramp State" column. At the end of the list, there is always a blank row for
entering new values.
The changes are accepted in the graphic display after pressing the "Accept" button.
Remote command:
n.a.
Zoom/Visible
Zooms the displayed area of the control list. The designation of the button changes
from "Zoom in" to "Zoom out".
With long control lists, the displayed area can be zoomed around the current "Cursor
Position".
Parameter "Visible/Bits Visible" determines the number of symbols/bits to be displayed.
Ramps outside the displayed area are not lost by zooming.
Remote command:
n.a.
Save/Save As
Pressing the "Save" button saves the changes made to the CList file selected for edit-
ing.
Selecting the "Save As" button creates a new control list. This opens the "Create Lists
Files Which Name?" window in which the control list can be created.
The file name has to be entered in field "File Name."
Remote command:
n.a.
Power Ramp Control
The Power Ramp Control menu is accessed via the "Custom Digital Modulation" main
menu.
The dialog provides access to the settings used to configure the power ramping, like
the source for the necessary control signals "Burst" and "Lev_Att", the form of the ramp
function and the applied attenuation (see also
"Power Ramping and Level Attenuation"
on page 333).
Baseband Signal - Baseband Block