Rohde & Schwarz SMBV100A, Руководство по эксплуатации

Страница: 105 / 911

Manual Operation
R&S
®
SMBV100A
90 Operating Manual 1176.8016.02 ─ 17
Activating the Winbar
► Use the WINBAR (CTRL+W) key to toggle the cursor between a button of the
"Winbar" and the block diagram.
The button that was active last in the Winbar is highlighted.
Closing an active menu
► Press the CLOSE key to close an active menu.
Tip: If the cursor is at the highest menu level, you can also use the ESC key to
close the active menu.
Accessing the header area
► Press the FREQ (CTRL+F) and LEVEL (CTRL+L) keys to activate the "Frequency"
or "Level" entry fields in the header area.
Keyboard Shortcuts
Keyboard shortcuts (e.g. "Ctrl + D" for the displaying the block diagram in the fore-
ground) provide direct access to all utility dialogs of the instrument (see
Chapter 4.8,
"Legend of Front-Panel Controls" , on page 112).
4.4 Setting Parameters
The R&S SMBV offers several and sometimes alternative possibilities for setting
parameters. Operation is possible from the front panel, with the aid of a mouse and/or
from a PC keyboard.
The examples whitin this description focus on the operation from the front panel.
For more information, refer to:
●
Chapter 4.8, "Legend of Front-Panel Controls" , on page 112 for an overview of key
functions and a cross-reference between the front panel keys and the keyboard
shortcuts
●
"Instrument Functions" in the Operating Manual for a detailed description of key
functions.
Most of the parameters are set in the different menus. The R&S SMBV provides alter-
native ways for accessing the dialogs. Turn the rotary knob and navigate to the corre-
sponding block in the block diagram and press the knob to open the dialog or perform
a mouse click on the "Config..." button.
An exception are the "Setup", "File" and "Hcopy" dialogs. In the "Setup" dialog, general
settings are made which are not directly concerned with signal generation, e.g. setting
Setting Parameters