manualshive.com logo in svg

Rohde & Schwarz SMBV100A, Руководство пользователя

Поделиться
Скачать
Rohde & Schwarz SMBV100A Скачать руководство пользователя страница 675

Remote Control Commands

R&S

®

SMBV100A

658

Operating Manual 1407.6062.32 ─ 08

Example: 

MMEM:CDIR '/var/smbv/Lists/Listmode'

selects the directory for the list mode files.

LIST:CAT?

queries the available lists.
Response: 

'list1,list2'

the lists 

list1

 and 

list2

 are available.

Usage: 

Query only

[:SOURce<hw>]:LIST:DELete 

<Delete>

The command deletes the specified list.

The files are stored with the fixed file extensions 

*.lsw

 in a directory of the user's choice.

The directory applicable to the command is defined with the command 

MMEMory:CDIR

.

To access the files in this directory, only the file name has to be given, without the path
and the file extension. A path can also be specified in command 

:SOUR:LIST:CAT?

, in

which case the file in the specified directory is deleted.

*RST

 does not affect data lists.

Setting parameters: 

<Delete>

<list file name>

Example: 

MMEM:CDIR '/var/smbv/Lists/Listmode'

selects the directory for the list mode files.

LIST:DEL 'LIST1'

deletes the list 

list1

.

Usage: 

Setting only

[:SOURce<hw>]:LIST:DELete:ALL

The command deletes all lists in the set directory. The List mode must be deactivated
beforehand to ensure that no lists are selected when this command is called
(

SOUR:FREQ:MODE CW or SWE

).

The files are stored with the fixed file extensions *

.lsw

 in a directory of the user's choice.

The directory applicable to the command is defined with the command 

MMEMory:CDIR

.

A path can also be specified in command 

SOUR:LIST:CAT?

, in which case all list mode

files in the specified directory are deleted.

*RST does not affect data lists.

SOURce Subsystem

Содержание SMBV100A













































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды