Rohde & Schwarz SMBV100A Скачать руководство пользователя страница 108 | Manualshive

Страница: 108 / 780

Rohde & Schwarz SMBV100A Скачать руководство пользователя страница 108

Manual Operation

R&S

®

SMBV100A

91

Operating Manual 1407.6062.32 ─ 08

The help system provides additionally an "Index" and a "Find" area, as well as "Zoom"
functions that are accessed by means of the corresponding buttons.

Navigating in the table of contents

1. To move through the displayed contents entries, use the UP/DOWN keys. Entries

that contain further entries are marked with a plus sign.

2. To display a help topic, press the "ENTER" key.

The corresponding help topic is displayed.

Navigating in the help topics

1. To scroll through a page, use the UP/DOWN arrow keys.

2. To jump to the linked topic, press the link text.

3. Use the "Previous" or "Next" links to jump to the corresponding topic.

4. Use the "Scroll Right" or "Scroll Left" buttons to shift the indicated area of the navi-

gation window to the left or right.

Using the Index

1. Select the "Go to Index" button.

2. Enter the first characters of the topic you are interested in. The entries starting with

these characters are displayed.

3. Press the ENTER key to change the focus.

4. Use the UP/DOWN keys to navigate and select the suitable keyword.

5. Press the ENTER key to display the help topic.

The corresponding help topic is displayed.

Closing the help window

► Press the HELP (F1) key.

4.7 File Management

The R&S SMBV uses files to save all instrument data, i.e. system and user data.

The user data includes saved instrument settings, data for the different digital standards,
lists for the List mode and the user correction as well as the waveforms for the arbitrary
waveform generator.

The files are stored on the internal flash card of the instrument, on a USB-stick or on the
a hard disk (R&S SMBV-B92). Both, the

/var

directory on the internal flash card or the

/

hdd

directory on the hard disk (R&S SMBV-B92), can be used to save user-defined data.

Any directory structure can be created on

/var

and

/hdd

. Some default subdirectories

are predefined, but can be changed at any time.

File Management

«
...
106
107
108
109
110
...
»

Содержание SMBV100A













































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды