manualshive.com logo in svg

Rohde & Schwarz SMB100A, Быстрый старт

Поделиться
Скачать
Rohde & Schwarz SMB100A Скачать руководство пользователя страница 75

Instrument Control

R&S

®

SMB100A

75

Quick Start Guide 1407.0812.62 ─ 20

● Closes all kinds of dialog boxes, if the edit mode is not active.
● Quits the edit mode, if the edit mode is active.
● Switches between different entry fields of a menu.
● Shifts the entry cursor from the header display to the previously active menu, or

to the previously highlighted block in the block diagram if no menu is active.

Moving the coursor to the heading area

► Press the [FREQ] (CTRL+F) or [LEVEL] (CTRL+L) key to move the cursor to the

header area.

8.1.5.2

 

Selecting a Control Element

Control elements are always selected in the same way no matter whether a function
block in the diagram, a menu in the menu tree, a parameter in the menu or an entry in
a list or table is concerned.

► To activate an element, put the cursor on it.

An active element is highlighted by a blue frame.

8.1.5.3

 

Switching Parameters On/Off

A parameter can be activated and deactivated using a button or a check box.

1. Select the parameter.

2. To change the state of a parameter, use the "Enter" function of the different control

media:
● Press the rotary knob
● Press [ENTER]
● Press the [TOGGLE ON OFF] (CTRL+T) key.

Colour and label of a button change, the check box is ticked or the tick is removed.

8.1.5.4

 

Entering a Value

Numeric and alphanumeric values can be edited in the entry fields. In the editing
mode, cursors of different colour are used. A blue cursor indicates the overwrite mode,
a green cursor the insert mode.

Numeric and alphanumeric values can either be newly entered or the existing value
can be changed. Incorrect entries are cleared with the [BACKSPACE] key.

Entering a new numerical value

1. Select the parameter.

Manual Operation

Содержание SMB100A





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды