Rohde & Schwarz SGU100A Скачать руководство пользователя страница 99 | Manualshive

Страница: 99 / 236

Rohde & Schwarz SGU100A Скачать руководство пользователя страница 99

General Instrument Settings and Instrument Setup

R&S

®

SGU100A

97

User Manual 1176.7726.02 ─ 09

Operation

Selects the desired maintenance operation.

Select Package

Available only for "Operation > Install Firmware Package".

Selects the firmware package to be installed, see also

Chapter 9.5, "How to Install a

New Firmware Version on the Instrument"

Update All

Available only for "Operation > Install Firmware Package".

Enable this function to perform a simultaneous firmware update on all instruments, that
are in active state and are connected to this controller.

Note:

A firmware update and the required subsequent restart and the automatically ini-

tiated internal adjustment process of the controller may be a time consuming operation.
This feature accelerates the update process and the required restart of the external PC
can be executed once after the update operation of all instruments is completed.

Security Password

Enters the password that is required to enable or to disable the settings protected by a
security password. The default is '123456'.

Note:

It is highly recommended to change the default security password before con-

necting the instrument to the network. To change the security password, select
"SGMA-GUI > Instrument Name > Setup > Security > Change Security Password".
The settings are only accepted after the "Accept" button is pressed.

Accept

Accept the selected operation and perform the required procedure.

8.7

Network Settings

The instrument is equipped with a network interface and can be connected to an Ether-
net LAN (local area network). The "Network Settings" dialog provides access to the
network settings.

Network Settings

«
...
97
98
99
100
101
...
»

Содержание SGU100A













































































































































































































































Отзывы:

Нет отзывов