Preparing for use
R&S
®
SGT100A
16
Getting Started 1419.4576.02 ─ 10
● Do not exceed the permissible total load placed on the product at the bot-
tom of the stack:
– 50
kg when stacking products of identical dimensions (left figure).
– 25
kg when stacking smaller products on top (middle figure).
Left
= Stacked correctly, same dimensions
Middle = Stacked correctly, different dimensions
Right = Stacked incorrectly, too many products
3.
NOTICE!
Overheating can damage the product.
Prevent overheating as follows:
● Keep a minimum distance of 10
cm between the fan openings of the prod-
uct and any object in the vicinity.
● Do not place the product next to heat-generating equipment such as radia-
tors or other products.
4.4.2
Mounting the R&S
SGT in a rack
To prepare the rack
1. Observe the requirements and instructions in
2.
NOTICE!
Insufficient airflow can cause overheating and damage the product.
Design and implement an efficient ventilation concept for the rack.
To mount the R&S
SGT in a rack
1. Use an adapter kit that fits the dimensions of the R&S
SGT to prepare the
instrument for rack mounting.
a) Order the rack adapter kit designed for the R&S
SGT. For the order num-
ber, see data sheet.
Setting up the R&S
SGT
