manualshive.com logo in svg

Rohde & Schwarz SGT100A, Начало работы

Поделиться
Скачать
Rohde & Schwarz SGT100A Скачать руководство пользователя страница 11

Documentation overview

R&S

®

SGT100A

11

Getting Started 1419.4576.02 ─ 10

3

 

Documentation overview

This section provides an overview of the R&S

 

SGT user documentation. Unless

specified otherwise, you find the documents on the R&S

 

SGT product page at:

www.rohde-schwarz.com/manual/sgt100a

3.1

 

Getting started manual

Introduces the R&S

 

SGT and describes how to set up and start working with the

product. Includes basic operations, typical measurement examples, and general
information, e.g. safety instructions, etc. A printed version is delivered with the
instrument.

3.2

 

User manual and help

Separate manuals for the base unit and the software options are provided for
download:

●

Base unit manual
Contains the description of all instrument modes and functions. It also pro-
vides an introduction to remote control, a complete description of the remote
control commands with programming examples, and information on mainte-
nance, instrument interfaces and error messages. Includes the contents of the
getting started manual.

●

Software option manual
Contains the description of the specific functions of an option. Basic informa-
tion on operating the R&S

 

SGT is not included.

The contents of the user manuals are available as help in the R&S

 

SGT. The help

offers quick, context-sensitive access to the complete information for the base
unit and the software options.

All user manuals are also available for download or for immediate display on the
Internet.

User manual and help

Содержание SGT100A




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды