Rohde & Schwarz RTM20 Series Скачать руководство пользователя страница 108 | Manualshive

Страница: 108 / 499

Rohde & Schwarz RTM20 Series Скачать руководство пользователя страница 108

Measurements

R&S

®

RTM20xx

93

User Manual 1317.4726.02 ─ 01

6.3.1.3

Statistics

For each active measurement, you can enable a statistic evaluation of the measurement
results. It returns the current, minimum and maximum measurement values, the average
and standard deviation, and the number of measured waveforms.

For configuration settings, see

Remote command:

●

MEASurement<m>:

●

MEASurement<m>:

●

MEASurement<m>:

●

MEASurement<m>:

●

MEASurement<m>:

●

MEASurement<m>:

●

MEASurement<m>:

●

MEASurement<m>:

6.3.2 Configuring and Performing Automatic Measurements

To configure and activate automatic measurements

1. Press the MEAS key.

2. Press "Meas. Place" to select one of the four measurement positions.

3. Press "Meas. Type" to select the type of measurement to perform. The type deter-

mines which results are displayed in the result table.
See also:

4. Press "Source" to select the waveform for which the measurement is to be performed.

The source can be any active waveform depending on the selected measurement
type.

5. For rise time, fall time, delay and phase measurements, press "Reference Level" and

set the reference levels as percentages of the high signal level.
See also:

"Reference Level: Upper, Middle, Lower Levels"

Automatic Measurements

«
...
106
107
108
109
110
...
»

Содержание RTM20 Series




















































































































































































































































































































































































































































































































Отзывы:

Нет отзывов