manualshive.com logo in svg

Rohde & Schwarz RTE-COM4, Начало работы, Страница: 84 / 123

Поделиться
Скачать
Rohde & Schwarz RTE-COM4 Скачать руководство пользователя страница 84

Operating the Instrument

R&S

®

RTE

76

Getting Started 1326.1026.02 ─ 06

Using the touchscreen is the most direct interaction way. Use your finger to
place waveforms on the screen, mark areas for zoom and histograms, set
parameters in dialog boxes, enter data, and much more. Most of the control
elements and actions on the screen are based on common concepts, and you
will easily become familiar with the user interface.
Tapping the screen works like clicking mouse buttons:
– Tap = click: Selects a parameter or provokes an action.
– Double-tap = double-click has the same effect as touch and hold = right-

click: Opens the on-screen keyboard or keypad, or a specific editor if avail-
able

●

Function keys and rotary knobs:
The front panel provides nearly all functions and controls to operate the instru-
ment in the classic ways, without touchscreen. As an exception, the signal bar
cannot be used with front panel controls.

●

Optional mouse and/or keyboard:
These devices work conform to Windows standards. The navigation keys on
the front panel correspond to the keys on the keyboard.

The usage of the touchscreen and navigation keys is described in detail in the fol-
lowing sections.

5.2

Touchscreen Display

5.2.1

Information on the Display

The touchscreen display of the instrument shows not only waveforms and mea-
surement results, but also information and everything that you need to control the
instrument. All waveform-related display elements are shown in 

Figure 5-1

. An

overview of control elements - like dialog box, toolbar - is given in 

Figure 5-4

 .

 

 

Touchscreen Display

Содержание RTE-COM4




























































































































Отзывы:

Нет отзывов