Rohde & Schwarz RTE-COM4 Скачать руководство пользователя страница 82

Страница: 82 / 123

Trying Out the Instrument

R&S

RTE

Getting Started 1326.1026.02 ─ 06

4. Select the "Numeric Results" tab.

5. Select the results that you want to save.

6. For further usage of the results, select the "CSV-Delimiter" that is used to con-

vert the values in columns. For MS Excel, the semicolon is recommended.

7. Tap "Save".

The results are saved to the following folder:

C:\Users\Public\Public Documents\Rohde-Schwarz\RTx\
ResultBoxExport

The file name is created according to the autonaming settings.

Saving and restoring device settings

1. Press the FILE key on the front panel.

2. Select the "Save/Recall" tab.

3. Select the "Settings" tab.

4. Tap "Save As". Enter the path and file name.

C:\Users\Public\Public Documents\Rohde-Schwarz\RTx\
SaveSets\Settings_Meas1.dfl

5. Tap "Save".

6. To restore the default instrument settings, press the PRESET key.

7. To repeat the initial measurement, tap the "Load saveset" icon on the toolbar.

8. Use the buttons on the left and the right to scroll the stored savesets. The file

name and a screenshot help identify the correct saveset.

9. Tap "Load".

The device and measurement settings are restored and you can repeat the
measurement.

Saving Data

Содержание RTE-COM4




























































































































Результаты поиска

Содержание RTE-COM4

Отзывы:

Rohde & Schwarz RTE-COM4, Начало работы, Страница: 82 / 123

Результаты поиска

Содержание RTE-COM4

Отзывы: