manualshive.com logo in svg

Rohde & Schwarz RTE-COM4, Начало работы, Страница: 68 / 123

Поделиться
Скачать
Rohde & Schwarz RTE-COM4 Скачать руководство пользователя страница 68

Trying Out the Instrument

R&S

®

RTE

60

Getting Started 1326.1026.02 ─ 06

7. To finish the measurement, tap the "Close" icon in the result box.

8. To remove the histogram, tap the "Delete" icon on the toolbar and then the

histogram. Both the histogram and any measurements based on that histo-
gram are deactivated.

4.7

Performing a Basic FFT Analysis

During FFT analysis, a signal in the time domain is converted to a spectrum of
frequencies. A basic spectrum waveform can be displayed quickly.

The usage of FFT is also shown in a short video that is available on the
instrument: "Tutorials > Getting Started > FFT".

1. Restore the default signal channel settings by pressing the AUTOSET key.

2. Tap the "FFT" icon on the toolbar. Then tap the diagram.

A math waveform is configured that uses the "Mag(FFT(x))" operator with
"Ch1" as source. The spectrum waveform is displayed in a new diagram.

 

Performing a Basic FFT Analysis

Содержание RTE-COM4




























































































































Отзывы:

Нет отзывов