manualshive.com logo in svg

Rohde & Schwarz RTE-COM4, Начало работы, Страница: 40 / 123

Поделиться
Скачать
Rohde & Schwarz RTE-COM4 Скачать руководство пользователя страница 40

Instrument Tour

R&S

®

RTE

32

Getting Started 1326.1026.02 ─ 06

The vertical rotary knobs are focused on the selected math waveform, and they
are illuminated in the color of the selected waveform.

POSITION / OFFSET (upper knob)

The upper rotary knob changes the vertical position or the offset of the selected
waveform. The horizontal axis and the selected waveform are moved vertically.
Turn clockwise to move up the waveform.
Press the knob to toggle the setting. The controlled parameter and its value are
shown in the input box in the upper left corner of the screen.

●

Position indicates the vertical location in divisions.

●

Offset moves the vertical center of the selected channel to the offset value.

The knob lights up in the color of the selected waveform.

SCALE

This rotary knob adjusts the vertical scale for the selected waveform. The knob
lights up in the color of the selected waveform.
Turn clockwise to stretch the waveform. Doing so, the scale value V/div decrea-
ses.
Press the knob to toggle between coarse and fine scale adjustment.

SIGNAL OFF

Turns off the selected signal and selects the next channel, math, or reference
waveform.
The key is illuminated in the color of the selected signal and changes the color
according to the new selection.

3.3.4

TRIGGER Controls

The keys and knob in the TRIGGER functional block adjust the trigger and start
or stop acquisition.

 

Keys and Controls

Содержание RTE-COM4




























































































































Отзывы:

Нет отзывов