manualshive.com logo in svg

Rohde & Schwarz RTE-COM4, Начало работы, Страница: 22 / 123

Поделиться
Скачать
Rohde & Schwarz RTE-COM4 Скачать руководство пользователя страница 22

Preparing for Use

R&S

®

RTE

14

Getting Started 1326.1026.02 ─ 06

Risk of instrument damage due to insufficient airflow in a rack

If the instrument is run with insufficient airflow for a longer period, the instru-
ment overheats, which can disturb the operation and even cause damage.
Make sure that all fan openings are unobstructed, that the airflow perfora-
tions are unimpeded, and that the minimum distance from the wall is 10

 

cm.

2.3

Starting the Instrument

Risk of injury and instrument damage

The instrument must be used in an appropriate manner to prevent electric
shock, fire, personal injury, or damage.

●

Do not open the instrument casing.

●

Read and observe the "Basic Safety Instructions" delivered as a printed
brochure with the instrument.
In addition, read and observe the safety instructions in the following sec-
tions. Notice that the data sheet may specify additional operating condi-
tions.

 

Starting the Instrument

Содержание RTE-COM4




























































































































Отзывы:

Нет отзывов