Operating the Instrument
R&S
®
RTE
103
Getting Started 1326.1026.02 ─ 06
2. Enter the text as you would on a normal keyboard.
● To enter a series of capital characters, tap "Caps".
To enter one capital character, tap "Shift".
● To use the currently defined value, tap "Cur". This is the value that was
used before the keyboard was displayed.
● The arrow buttons move the cursor left or right.
● "Bksp" deletes the last character before the cursor.
3. Tap "Enter" to complete the entry.
To enter numeric data in a dialog box with navigation controls
1. To navigate to the entry field, press the
⇤
FIELD and
⇥
FIELD keys.
2. To change the value with a small step size, turn the rotary knob.
Alternatively, press the
⇧
and
⇩
keys for a larger step size.
If you edit numeric data in tables, the entry field must be in edit mode. To activate
the edit mode, press ENTER, or the
☑
key, or the navigation rotary knob.
5.10
Messages
Status messages of the instrument are displayed for a few seconds. Then they
are saved in a message box in the upper right corner of the screen. By default,
the message box is closed. You can open it to read the messages and to delete
them.
Messages