manualshive.com logo in svg

Rohde & Schwarz RTE-COM4, Начало работы, Страница: 104 / 123

Поделиться
Скачать
Rohde & Schwarz RTE-COM4 Скачать руководство пользователя страница 104

Operating the Instrument

R&S

®

RTE

96

Getting Started 1326.1026.02 ─ 06

Select

Enables the select mode to move and modify objects on the touchscreen.

The select mode is activated automatically when an analyzing function is comple-
ted.

Delete

Removes zoom and histogram areas and their diagrams; measurement

areas and their associated results; and mask segments. The icon also switches
off a waveform.
Tap the icon and then tap the area or diagram to be deleted, or the waveform to
be switched off.

Save Settings

Saves the current instrument settings in a saveset. The filename is created

according to the autonaming pattern. You can reload the saveset using the "Load
saveset (Graphical recall)" toolbar icon, or using FILE > "Save/Recall" > "Set-
tings".

Save Screenshot

Saves a screenshot of the current display using the settings defined in

"File" menu > "Print Setup".

Create Report

Creates a report of the current measurement settings and results using the

settings defined in "File" menu > "Report Setup".

Clear Screen

Deletes all measurement results including long term measurement and

statistic results. Also deletes the current measurement and channel waveforms.

Autoset and Preset

Performs an autoset, or a preset to a default state. The icons have

the same functionality as the corresponding keys on the front panel. They are
useful when you control the instrument remotely.

Run / Stop and Run Single

Starts and stops the continuous acquisition, or starts a defined

number of acquisition cycles. The icons have the same functionality as the corre-
sponding keys on the front panel. They are useful when you control the instru-
ment remotely.

Toolbar

Содержание RTE-COM4




























































































































Отзывы:

Нет отзывов