manualshive.com logo in svg

Rohde & Schwarz RT-ZD40, Руководство пользователя

Поделиться
Скачать
Rohde & Schwarz RT-ZD40 Скачать руководство пользователя страница 5

Product Description

R&S

®

RT-ZD40

5

User Manual 1410.5363.02 ─ 05

1

 

Product Description

1.1

 

Key Features and Key Characteristics

The R&S

 

RT-ZD40 is a differential probe with high input impedance. It is used for

differential voltage measurements from DC to 4.5

 

GHz.

Differential probes can be used for single-ended and differential applications.
They are equipped with two high-impedance inputs and can measure the voltage
between any two test points. Unlike using single-ended probes, there is no need
to ensure that one of the test points is always at ground potential.

The comprehensive accessory set allows this probe to be connected to a wide
variety of devices under test (DUT). Provided with special features such as the
R&S ProbeMeter and the micro button, the R&S

 

RT-ZD40 is designed to meet

tomorrow's challenges in probing.

The probe is equipped with theRohde

 

&

 

Schwarz probe interface. It can be con-

nected to any Rohde

 

&

 

Schwarz instrument that is compatible with this interface.

When connected to the front panel, the probe is controlled by the oscilloscope's
software. Supported oscilloscopes are listed in the data sheet.

Using a specially developed adapter (see 

Chapter 1.4.2, "Optional Accessories"

,

on page 12), the probe can also be connected to any other base unit.

1.1.1

 

Key Characteristics

The key characteristics of the probe are the following:

Key Features and Key Characteristics

Содержание RT-ZD40

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды