manualshive.com logo in svg

Rohde & Schwarz RT-ZD40, Руководство пользователя

Поделиться
Скачать
Rohde & Schwarz RT-ZD40 Скачать руководство пользователя страница 15

Putting into Operation

R&S

®

RT-ZD40

15

User Manual 1410.5363.02 ─ 05

During usage, the probe slightly heats up. Warming is normal behavior and not a
sign of malfunction.

Damage caused by electrostatic discharge

Electrostatic discharge (ESD) can damage the electronic components of the
probe and the instrument, and also the device under test (DUT). Electro-
static discharge is most likely to occur when you connect or disconnect a
DUT or test fixture to the probe and to the instrument's test ports. To pre-
vent electrostatic discharge, use a wrist strap and cord and connect your-
self to the ground, or use a conductive floor mat and heel strap combina-
tion. Discharge cables and probe tips before you connect them.

2.1

 

Connecting the Probe to the Oscilloscope

► Connect the probe box (1) to the Rohde

 

&

 

Schwarz probe interface of the

oscilloscope (2).
The probe snaps in when connected properly to the port.

Figure 2-1: Connecting the probe to the Rohde

 

&

 

Schwarz oscilloscope

Connecting the Probe to the Oscilloscope

Содержание RT-ZD40

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды