Rohde & Schwarz R&S ZN-Z3x, Руководство пользователя

Страница: 20 / 62

Putting the System into Operation
R&S
®
ZN-Z3x
20 User Manual 1177.6381.02 ─ 03
2.5.1 USB
If required, connect the USB connecting cable to the USB type B (slave) port on
the rear panel. With direct connection to a master device, a connecting cable A-B
(plug type A onto plug type B) must be used.
2.5.2 LAN
The connection to the LAN is made using a commercially available RJ-45 cable
via the LAN interface on the back of the instrument.
Possible disturbance of network operation
Only insert or remove the network cable when the instrument is turned off.
That is the only way to ensure reliable detection of the network connection
and avoid faults during operation of the instrument.
The network interface works with an 100 Mbit/s IEEE 802.3u Ethernet. The
TCP/IP network protocol and the associated network services are preconfigured.
In order to exchange data in a local area network (LAN), it must be possible to
address each connected computer or instrument via a unique IP address or a
hostname.
By default, every R&S ZN-Z30 is assigned a hostname
ZNZ30X<serial
number>
.
2.5.2.1 Networks with DHCP
The R&S ZN-Z30 is preconfigured to use the dynamic host configuration protocol
(DHCP). In such networks, the R&S ZN-Z30 is automatically assigned a free IP
address.
2.5.2.2 Static IP Configuration
With static IP configuration, the static IP configuration data are usually provided
by the network administrator. They can be activated on the R&S
ZN-Z3x using
remote control.
Connecting External Devices