Rohde & Schwarz R&S UPP, Руководство пользователя

Страница: 99 / 938

Getting Started
R&S
®
UPP
83 User Manual 1411.1055.32 ─ 10
Sweep Graph 1 to 4
FFT Graph 1 to 2
Waveform
Bar Graph 1 to 2
●
Up to four of each of these display windows can be opened (depending on
the window type) in order to display the scans of the different measurements
●
Graphical display shows one or two channels
●
The measurement results are displayed in the way defined in the associated
configuration panel
Dig Analyzer Protocol
●
The analyzed data of the digital audio protocol is displayed here (R&S UPP
K21 option (digital audio protocol))
3.3.6 Basic Rules of Operation
The following basic rules are intended to simplify operation of the audio analyzer:
●
Operating sequence in the panels from top to bottom
Changes to parameters of individual menu items may affect the selection or value
range of menu items which are usually located further down (they affect the selec-
tion or value range in fields located higher up in only a few exceptional cases).
●
Sequence Generator – Analyzer – Measured value display
Many setting parameters can be copied to other panels. For example, the sweep
frequency settings can automatically be adopted as the scaling for the graph.
3.3.7 Function Selection and Value Entry
All functions and parameters are set in the panels.
Besides the mouse, the up/down cursor keys of the external keyboard can also be
used for navigating.
Panels can only be operated if they have the focus (indicated by the blue title bar).
Changing from one panel to another is done by clicking on the title bar.
Before settings can be made in a panel, the relevant parameter field must be highligh-
ted, i.e. it must have the focus. This is indicated by a selection frame around the entry
field.
The settings are made in the following ways:
Brief Introduction to Operation