Advanced tasks
36
Administration manual 4603.7988.02 ─ 03
5. Open
T:\EFI\RSCS\pba.config
.
6. Add the entry
StealthMode=1
.
7. Save your changes.
6.4.2
Legacy BIOS/MBR
6.4.2.1
Preparing stealth mode
First Windows installation
1. Boot the workstation from a Windows installation medium.
2. Start a new installation of Windows.
3. Delete all existing partitions.
4. Create a partition with [x] GB.
Note:
Leave enough space for the second Windows installation.
Name
Type
Size
Description
Partition 1
System
100 MB
Boot partition
Partition 2
Primary
[x] GB
First Windows partition
Unpartitioned space
‒
‒
‒
5. Select the first Windows partition.
6. Install Windows.
Preparing the second Windows installation
Before initializing the second Windows installation, you need to change the status of
the first installation. To do this, we recommend using a tool such as a GParted boot
disk.
For more information on the GParted boot disk, refer to
.
1. Boot the workstation from the GParted boot disk.
2. To access the graphical user interface, confirm the console prompts.
3. Right click on "/dev/sda1" > "Manage Flags".
4. Remove the flag "boot".
5. Set to the flag "hidden".
6. Right click on "/dev/sda2" > "Manage Flags".
Stealth mode