Rohde & Schwarz R&S Trusted Disk 3.3.1, Руководство администратора

Страница: 34 / 49

Advanced tasks
34 Administration manual 4603.7988.02 ─ 03
8. Start a new installation of Windows.
9. In the unpartitioned space, create a new partition with [y] GB.
10. Select the new partition.
11. Install Windows.
You have installed two Windows installations on two partitions.
6.4.1.2 Configuring stealth mode
Make this configuration before initializing the full-disk encryption.
1. Boot the workstation with the system that you want to encrypt (see Chapter 6.4.1.1,
"Preparing stealth mode" , on page 33).
2. Start a command prompt with administrator rights.
3. Enter
mountvol T: /s
.
Note: You can use any free drive letter.
4. Enter the following commands:
cd /d T:\efi\microsoft\boot\
bcdedit /enum /v
Figure 6-2: Windows boot loader GUIDs
5. Export
bcd-boot.1
and
bcd-boot.2
to the EFI system partition.
Stealth mode