manualshive.com logo in svg

Rohde & Schwarz R&S RTM-B1, Руководство пользователя, Страница: 131 / 854

Поделиться
Скачать
Rohde & Schwarz R&S RTM-B1 Скачать руководство пользователя страница 131

Waveform Analysis

R&S

®

RTM3000

131

User Manual 1335.9090.02 ─ 08

Find Threshold

Analyzes the signal, sets the level to 50% of the signal amplitude, and also sets the
hysteresis.

6.5.4

 

Width Search

The width search finds pulses with an exact pulse width, or pulses shorter or longer
than a given time, or pulses inside or outside the allowable time range. It is similar to
the width trigger.

► [Search] > "Search Type" = "Width" > "Setup"

Polarity

Indicates the polarity of the pulse to be searched for.

Remote command: 

SEARch:TRIGger:WIDTh:POLarity

 

on page 484

Level

Sets the voltage level on which the pulse width is measured. To let the instrument set
the level, tap "Find Threshold".

Remote command: 

SEARch:TRIGger:WIDTh:LEVel

 

on page 484

Hysteresis

Sets a hysteresis range to the search level to avoid unwanted search results caused
by noise oscillation around the level. To let the instrument set the hysteresis, tap "Find
Threshold".

Search

www.allice.de

Allice Messtechnik GmbH

Содержание R&S RTM-B1























































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов