manualshive.com logo in svg

Rohde & Schwarz R&S RTB2000, Руководство пользователя, Страница: 281 / 609

Поделиться
Скачать
Rohde & Schwarz R&S RTB2000 Скачать руководство пользователя страница 281

Signal generation (option R&S

 

RTB-B6)

R&S

®

RTB2000

281

User Manual 1333.1611.02 ─ 11

14

 

Signal generation (option R&S

 

RTB-B6)

The R&S

 

RTB2000 has an integrated function and pattern generator which can gener-

ate signals while testing circuits, for instance.

The waveform generator can output simple functions, modulated sine waveform, arbi-
trary waveforms and sweep waveforms. The integrated pattern generator can generate
individual or cycle patterns and simple bus signal patterns.

14.1

 

Function generator

The waveform generator can output simple functions, modulated sine waveform, arbi-
trary waveforms and sweep waveforms. The signal is output at the [Aux Out] connector
on the front panel.

Short Menu

In the short menu for the function generator, you can open the comprehensive menu,
and turn off the function generator.

You can also create an arbitrary waveform by copying a waveform and display or hide
the arbitrary waveform. For description of the functions in the short menu, see 

Chap-

ter 14.1.6, "Arbitrary setup settings"

, 

on page 291.

Figure 14-1: Short menu to create arbitrary waveform

14.1.1

 

Using the function generator

To configure a function waveform

1. Press the [Gen] key on the front panel.

2. Select the "Function" that you want to generate, e.g. "Sine".

3. Depending on the selected "Function", configure the settings of the waveform like

"Frequency" and "Amplitude".

Function generator

Содержание R&S RTB2000


































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов