manualshive.com logo in svg

Rohde & Schwarz R&S RTB2000, Руководство пользователя, Страница: 28 / 609

Поделиться
Скачать
Rohde & Schwarz R&S RTB2000 Скачать руководство пользователя страница 28

Preface

R&S

®

RTB2000

28

User Manual 1333.1611.02 ─ 11

Service manual

Describes the performance test for checking the rated specifications, module replace-
ment and repair, firmware update, troubleshooting and fault elimination, and contains
mechanical drawings and spare part lists. The service manual is available for regis-
tered users on the global Rohde

 

&

 

Schwarz information system (GLORIS, 

https://

gloris.rohde-schwarz.com

).

1.2.2

 

Data sheet and brochure

The data sheet contains the technical specifications of the R&S

 

RTB2000. It also lists

the options with their order numbers and optional accessories. The brochure provides
an overview of the instrument and deals with the specific characteristics.

See 

www.rohde-schwarz.com/brochure-datasheet/rtb2000

1.2.3

 

Calibration certificate

The document is available on 

https://gloris.rohde-schwarz.com/calcert

. You need the

device ID of your instrument, which you can find on a label on the rear panel.

1.2.4

 

Release notes and open source acknowledgment

The release notes list new features, improvements and known issues of the current
firmware version, and describe the firmware installation. The open source acknowledg-
ment document provides verbatim license texts of the used open source software.

See 

www.rohde-schwarz.com/firmware/rtb2000

. The open source acknowledgment

documant can also be read directly on the instrument.

1.3

 

Conventions used in the documentation

1.3.1

 

Typographical conventions

The following text markers are used throughout this documentation:

Convention

Description

"Graphical user interface ele-
ments"

All names of graphical user interface elements on the screen, such as
dialog boxes, menus, options, buttons, and softkeys are enclosed by
quotation marks.

[Keys]

Key and knob names are enclosed by square brackets.

Filenames, commands,
program code

Filenames, commands, coding samples and screen output are distin-
guished by their font.

Conventions used in the documentation

Содержание R&S RTB2000


































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов