Rohde & Schwarz R&S OSP-B157W8, Начало работы, Страница: 10 / 43

Documentation Overview
R&S
®
OSP
‑
B157W8 (PLUS) R&S
®
OSP
‑
B157WX
10 Getting Started 1178.5808.02 ─ 03
2.4 Help
The R&S OSP-B157W8 and R&S OSP-B157W8PLUS are operated either by
direct bus commands or by the software R&S WMS32, which is part of the
R&S RF Test Suite. The R&S OSP-B157WX can also be operated by the soft-
ware R&S OSP Panel.
The software-embedded help content in the R&S RF Test Suite provides quick,
context-sensitive access to information for the software packages R&S EMC32,
R&S AMS32 and R&S WMS32. Refer to the R&S WMS32 part of this help con-
tent for application of the modules and switch units in the R&S TS8997 test sys-
tem. The help content also describes templates for test cases that you can use in
tests according to various FCC and ETSI standards. Examples are FCC
15.407,
ETSI EN 300 328 or ETSI EN 301 893.
The software, which requires a license, is available at www.rohde-schwarz.com/
software/emc32 .
2.5 Basic Safety Instructions
Contains safety instructions, operating conditions and further important informa-
tion. The printed document is delivered with the switch unit.
2.6 R&S OSP on the Internet
The website www.rohde-schwarz.com/product/osp provides:
●
Key facts, features and options for the family of R&S OSP switch units
●
Rohde & Schwarz contacts for information, quotes, demos and calibration ser-
vices
●
Technical documentation (operating manual for R&S OSP switch units)
●
Brochures and Data Sheets
●
Application Notes
●
Drivers
●
The current firmware version with OSA and release notes
●
The R&S OSP Panel software with release notes
R&S OSP on the Internet