Rohde & Schwarz R&S NGL200 Series, Руководство пользователя

Страница: 32 / 201

Operating Basics
R&S
®
NGL200/NGM200
30 User Manual 1178.8736.02 ─ 09
Device status bar
Function Description
Touchscreen
If touch input is disabled, the icon is displayed and
highlighted in yellow.
See Chapter 5.3.1.3, "User Key" , on page 40.
SCPI command
If a SCPI command is received successfully, the
icon blinks once in white.
If an error is in the SCPI error queue, the icon is
highlighted in red.
If no activity, icon is displayed in gray.
See Chapter 7, "Remote Control Commands" ,
on page 96.
Trigger event
Icon blinks once in white when a trigger event
occurs.
See Figure 6-18 .
Fast log
Fast logging is only visible with NGM models.
If active, icon is highlighted in white.
If disabled, icon is highlighted in gray.
See Chapter 6.11, "FastLog" , on page 75.
Data logging
If data logging is present, the icon is highlighted in
white.
If an error is present, the icon is highlighted in red.
See Chapter 6.10, "Data Logging" , on page 73.
WLAN
Only visible if software option Wireless LAN is
active.
If connection is present, the icon is highlighted in
white. If both WLAN and LAN connection are pres-
ent, the icon is highlighted with a line cross over.
If no connection or WLAN is disabled, the icon is
highlighted in gray.
See Chapter 6.16.1.2, "Wireless LAN Connection" ,
on page 87.
USB device interface
If a host command is received in USB interface, the
icon is highlighted in white.
LAN interface
If connected, the icon is highlighted in white.
If no connection or an error is present in connection,
the icon is highlighted in red.
See Chapter 6.16, "Interfaces" , on page 83.
Time
Time displays in hh:mm:ss format.
See Chapter 6.17.4, "Date and Time" , on page 93.
Display Overview